Katalog Produk (500) - PT. YAKIN MAJU SENTOSA

Digitronic Depth Gauge 172 Series ( MNW )

* Range 0-550 mm
* 0-25mm/ 0-1" travel indicator
* Inch/ mm conversion
* Zero setting at any position
* Rods connect together for full 550mm capacity
* Base size: 100mm
* ....

Mechanical Depth....

* Range 0-550 mm
* 0-25mm travel indicator
* Satin chrome finish
* Rods connect together for full 550mm capacity
* Base size: 100mm
* Includes 2 extra points for small hole....

Digitronic Depth....

* Range 0-300 mm
* Top quality digital depth caliper
* Available with hook ( H) or without hook ( B)
* Modern design
* Large 7.5mm character height digital display
* Long....

Vernier Depth Gauge....

* Range 0-1000 mm
* Standard workshop model made of alloyed stainless steel
* Available with hook ( H) or without hook ( B)
* Screw stop solid slider model
* With laser....

Traditional....

* Fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life
* Fully hardened and ground datum faces to resist....

Combination Set 520....

* Range 0-180Â °
* Three measuring heads are attached to the stainless steel ruler, allowing versatile measurements on various types of work pieces
* Square head, protactor head....

Long Jaw Vernier....

* Range 0-2000 mm
* With longer jaws which permit the measurement of large workpieces
* Jaws for internal and external measurement
* Stop screw for locking the slider
* Made....

Solid Slider Large....

* Range 0-3000 mm
* Standard workshop model with stop screw
* Mono block solid slider
* Made of hardened alloyed stainless steel
* Jaws for internal and external measurement
....

Large Workshop....

* Range 0-3000 mm
* Standard workshop model with stop screw
* Mono block solid slider
* With fine adjustment
* Jaws for internal and external measurement
* Made of hardened....

Workshop Vernier....

* Range 0-500 mm
* Combination-jaw model
* Separate jaws for internal and external measurement
* Stop screw for locking the slider/ jaws
* Made of hardened stainless steel
* ....

Inside Vernier....

* Range 0-150 mm
* Features extra long jaws for inside measurement
* High precision model with mono block solid slider
* 4-way measurement possible
* Made of alloyed hardened....

Vernier Caliper for....

* Range 0-150 mm
* Mono-block solid slider model
* Made of hardened stainless steel
* Chromed scale with laser engraved graduations
* Measuring surface is micro-lapped
* ....

Vernier Caliper for....

* Range 0-150 mm
* Mono-block solid slider model
* Made of hardened stainless steel
* Chromed scale with laser engraved graduations
* Measuring surface is micro-lapped
* ....

Precision Vernier....

* Range 0-150 mm
* High precision vernier caliper
* Solid slider model, 4-way measurement
* Made of hardened stainless steel
* Chromed scale with laser engraved graduations
* ....

High Precision....

* Range 0-150 mm
* Top model, superior design vernier caliper
* Convex slider shape for easy reading
* 4-way measurement
* Long life guaranteed
* Ultra low friction slider
* ....

Precision Vernier....

* Range 0-300 mm
* High precision vernier caliper
* 4-way measurement
* Mono-block solid slider model
* Made of hardened stainless steel
* Chromed scale with laser engraved....

Precision Miniature....

* Range 0-70 mm
* Extra small precision vernier caliper
* Mono-block solid slider model
* 4-way measurement
* Made of hardened stainless steel
* Chromed scale with laser....

Workshop Vernier....

* Range 0 - 300 mm
* Standard workshop model with stop screw
* Assembly slider model
* 4-way measurement
* Made of hardened alloyed stainless steel
* Chromed scale with....

Workshop Vernier....

* Range 0-300 mm
* Standard workshop model with stop screw
* Equipped with fine adjustment
* 4-way measurement
* Assembly slider model
* Made of hardened alloyed stainless....

Universal Centre....

* Range 0-300 mm
* Universal equipment for finding the centre of a bore or to measure the concentricity of work pieces
* Indicator always faces operator, also when spindle runs
....

Adjustable Dial....

* Range 25-175 mm
* Allows for extended range measurement utilising 1 dial and interchangeable anvils
* Reading 0.02mm
* Leg length 87mm
* 6 interchangeable anvils

Bore Gauge Sets 316....

* Range 6-120mm
* With interchangeable contact points
* Set of carbide tipped contact points included
* Unique self centring device
* Supplied with dial indicator, resolution....

Digitronic Bore....

* Range 35-160 mm
* With interchangeable contact points
* Set of carbide tipped contact points included
* Unique self centring device
* Supplied with digital indicator with....

Digital Bore Gauging....

# Measurement range from 6 - 100mm
# Ergonomically designed pistol grip body
# LCD display unit with rotating display for easy reading at any angle
# Functions include 2 pre....

Internal & External....

Internal Calipers - Long Leg :
o Range 20-40 mm
o Graduations 0.02mm
o Effective leg length 87mm
o Maximum groove depth = A / minimum width = B

Internal Calipers - Short....

External Digitronic....

* Range 0-50 mm
* Large LCD display
* 0.01mm or 0.0005" resolution
* Preset capability
* Direct Inch / Metric conversion
* Absolute / Incremental measurements

Internal Digitronic....

* Range 5-50 mm
* Large LCD display
* 0.01mm or 0.0005" resolution
* Preset capability
* Direct Inch/ Metric conversion
* Absolute / Incremental measurements

Analogue Bore....

* Range 2-300mm
* 2-6mm 2 point / 6-300mm 3 point measurement
* Tungsten carbide contact points above 12.5mm
* Traceable Certificates supplied as standard with all micrometers....

Coating Thickness....

Handheld coating thickness gauge with FN-probe for steel and non-ferrous substrates

â € ¢ With external probes
â € ¢ Magnetic induction / eddy current measuring principle
â € ¢ Non....

Coating Thickness....

Handheld coating thickness gauge with N-probe for non-ferrous substrates
Features

â € ¢ With external probe
â € ¢ Eddy current measuring principle
â € ¢ Insulating coating on non....

Coating Thickness....

Handheld coating thickness gauge with F-probe for steel substrates

â € ¢ With external probe
â € ¢ Magnetic induction measuring principle
â € ¢ Non-magnetic coating on ferrous....

Coating Thickness....

Handheld coating thickness gauge with FN-probe for steel and non-ferrous substrates

â € ¢ With integrated probe
â € ¢ Magnetic induction / eddy current measuring principle
â € ¢ ....

Coating Thickness....

Handheld coating thickness gauge with N-probe for non-ferrous substrates

â € ¢ With integrated probe
â € ¢ Eddy current measuring principle
â € ¢ Insulating coating on non-ferrous....

Coating Thickness....

Handheld coating thickness gauge with F-probe for steel substrates

â € ¢ With integrated probe
â € ¢ Magnetic induction measuring principle
â € ¢ Non-magnetic coating on ferrous....

Coating Thickness....

Handheld coating thickness gauge with N-probe for non-ferrous substrates

â € ¢ Clear 4 digit segment LCD display
â € ¢ Eddy current measuring principle
â € ¢ Insulating coating on....

Coating Thickness....

Handheld coating thickness gauge with F-probe for steel substrates

â € ¢ Clear 4 digit segment LCD display
â € ¢ Magnetic induction measuring principle
â € ¢ Non-magnetic coating....

Ultrasonic Portable....

The MET-U1A differs completely from traditional hardness testers: instead of measuring the size of the indentation of the test sample using a microscope, it uses a diamond....

Portable Hardness....

Handheld dynamic metal hardness tester with hardness conversion and automatic position setting

â € ¢ Dynamic hardness testing; quick and reliable
â € ¢ Wide measuring range in HL....

Portable Hardness....

Handheld dynamic metal hardness tester with integrated impact device, large memory, USB data output

â € ¢ Dynamic hardness testing; quick and reliable
â € ¢ Wide measuring range....

Portable Hardness....

Handheld dynamic metal hardness tester with integrated impact device, large memory, USB data output

â € ¢ Dynamic hardness testing; quick and reliable
â € ¢ Wide measuring range....

Portable Hardness....

Handheld dynamic metal hardness tester with integrated impact device, large memory, USB data output

â € ¢ Dynamic hardness testing; quick and reliable
â € ¢ Wide measuring range....

Premium Closed Loop....

High accuracy and repeatability through closed loop and load cell combined system, 4 models available

â € ¢ Measures at choice Standard, Superficial or combined Rockwell hardness....

Premium Twin Scale....

LCD touch screen, superior functionality, ultra high precision, 3 models available

â € ¢ Measures all Standard & Superficial Rockwell hardness values
â € ¢ Simultaneous conversion....

Premium Rockwell....

LCD touch screen, superior functionality, ultra high precision, 3 models available

â € ¢ Measures all standard Rockwell hardness values
â € ¢ Simultaneous conversion to HV, HB and....

Basic Digital....

Basic digital motorised bench hardness tester for superficial Rockwell scales

â € ¢ Basic superficial digital Rockwell type bench tester offering accuracy, reliability and....

Rockwell Superficial....

Motorised hardness testers for regular Rockwell scales

â € ¢ Superficial Rockwell scales
â € ¢ Electronic control of load duration ( dwell time)
â € ¢ Motorised testing procedure
....

Rockwell Hardness....

Ready-to-test analogue Rockwell type tester with lever system for direct load application

â € ¢ Basic regular Rockwell type tester offering accuracy, reliabilityand durability at....

Rockwell Hardness....

Bright LCD display with hardness conversion, tolerance check, built-in printer and data-output

â € ¢ Digital LCD reading of 15 regular Rockwell scales!
â € ¢ Conversion to all....